Make vehicle lifting faster and more convenient with the ESCO 92040 Pro Series 2-Ton Bladder Jack, a professional pneumatic lifting tool designed for automotive repair shops, tire service centers, collision repair facilities, and mobile technicians.
With a lifting capacity of 4,000 lbs (2 tons), this two-stage air bladder jack uses compressed air to raise compatible vehicles and equipment efficiently. Its compact 4.5-inch starting height allows access beneath vehicles with limited clearance, while its maximum lifting height of 17 inches provides additional working space.
The heavy-duty air bladder construction, internal stabilization cylinder, and large bottom plate help provide stability during lifting. A dual safety valve helps prevent over-inflation and uncontrolled lowering under load, supporting safer operation when used according to the manufacturer’s instructions.
The ESCO 92040 also includes a 3-inch extension for additional lifting height, making it a versatile solution for professional automotive and body shop applications.
Key Features
- 2-Ton Lifting Capacity: Supports loads up to 4,000 lbs (1,814 kg).
- Two-Stage Air Bladder Design: Provides efficient pneumatic vehicle lifting.
- Low Starting Height: 4.5-inch minimum height for improved access beneath compatible vehicles.
- 17-Inch Maximum Lift Height: Provides useful clearance with the included extension.
- 3-Inch Extension Included: Adds versatility for different lifting requirements.
- Dual Safety Valve: Helps prevent over-inflation and uncontrolled deflation under load.
- Internal Stabilization Cylinder: Helps maintain stability and positioning during operation.
- Large Bottom Plate: Provides a broad supporting base.
- Heavy-Duty Air Bladders: Designed for repeated use in professional service environments.
- Convenient Control Handle: Allows easy up-and-down operation.
- Fully Pneumatic Operation: Uses compressed air rather than a manual hydraulic pump.
Product Specifications
- Brand: ESCO
- Model: 92040
- Series: Pro Series
- Product Type: Two-Stage Pneumatic Air Bladder Jack
- Lifting Capacity: 2 Tons / 4,000 lbs / 1,814 kg
- Minimum Height: 4.5 inches / 115 mm
- Maximum Height: 17 inches / 430 mm
- Lifting Height: 9.25 inches / 235 mm
- Included Extension Height: 3 inches / 80 mm
- Overall Width: 10.4 inches / 265 mm
- Required Working Air Pressure: 100–145 PSI
- Operation: Compressed air
- Safety System: Dual safety valve
- Stabilization: Internal cylinder system
- Construction: Heavy-duty steel and air bladder assembly
- Weight: Approximately 34 lbs / 15 kg
- Warranty: 1-year limited warranty
Ideal Applications
- Professional automotive repair shops
- Tire and wheel service centers
- Collision repair and body shops
- Automotive frame machine support
- Brake and suspension maintenance
- Passenger cars and compatible SUVs
- Light-truck maintenance
- Mobile automotive service operations
Important Safety Information
Use only with a suitable compressed-air supply within the specified 100–145 PSI operating range. Never exceed the 2-ton rated capacity. Position the jack on firm, level ground and ensure the vehicle’s approved lifting point is correctly aligned. Never place any part of your body beneath a vehicle supported only by an air bladder jack. Always use appropriately rated jack stands for additional support before working underneath a raised vehicle.
Professional Pneumatic Lifting Performance
Choose the ESCO 92040 Pro Series Bladder Jack for compact design, reliable pneumatic lifting, and practical versatility. Its 4,000 lb capacity and included extension make it a valuable addition to professional tire shops, collision repair facilities, and automotive service garages.














Reviews
There are no reviews yet.